Quality
Is Our Top Priority so we always go the extra mile!
Color Issues - When
you order blue Pennsylvania Bluestone as apposed to full
color, you can rest assured that you will receive blue and
only blue. There will be no discolorations in your
stone. All non-blue stone is trimmed or sorted out to
full color pallets. Cut Issues
- All treads are cut perfectly square with laser
guided gantry saws. Dimensionally speaking these cuts
are on the money so a 2'x4'x2" will be exactly
24"x48"x2" consistently. Thermal pattern flagstone on
the other hand will be a 1/2" short both in
length and width. A 2'x3' piece will therefore be
23.5"x35.5" exactly and consistently.
Pattern Flagstone has traditionally been cut a half inch short to
allow for 1/2" cement joints. Natural cleft pattern
flagstone is roughly 1/2" short so a 2'x3' unit will
be roughly 23.5"x35.5".
Unacceptable Stone -
As we cut through the stone and prepare special orders it is
inevitable that we will run into stone with significant
flaws. Now and then we find small areas of shale, coal
and other deposits. These pieces are discarded.
Sometimes when we thermal stone it becomes obvious that
there are areas of unacceptable density and the
stone thermals unevenly. These pieces are also
discarded. When your stone arrives it must be perfect.
All Face edges and corners are sharp and never chipped.
|